FASTEST LINE FOLLOWER

Fastest Line Follower

Team to build own autonomous robot within the specified dimensions to achieve the maximum speed on the given track and reach the destination in minimum time. The robot must start behind the starting point and is considered to have crossed the finishing line if any part of the robot crosses it in a full lap of the course. The robot must follow the black line. The competition area has a special place defined for the robot’s operation (here after COMPETITION FIELD).

CRITERIEA

  • 200 Teams to participate in the Fastest Line Follower challenge.
  • All participants will get a certification of Participation from  International Robotics Olympiad Foundation
  • Eligibility Criteria: Entry is open for all age groups below 30 years.
Register

How to get on FLF

    • A match is played by a single team in one go, with each team consisting of 1 Wireless Bot. An individual may participate or construct a team of a minimum of 2 and a maximum of 10 members. Any institution (School/College/University/Vocational Institution) or group of students (within defined age), may form a team.

      • STEP 1: Register your RoboClub 
      • STEP 2: Once your FLF Club is active, you may select Fastest Line Follower Challenge category from the competition list in your login panel, and apply. You will also be needed to select members from your club who would participate in challenge. Maximum 10 members in 1 team can participate. A club can apply multiple teams for the same challenge.
      • STEP 3: Construct a wireless autonomous or manual Bot. Ready-made bots will not be allowed to compete. Only self-made.Prepare a video of 1 minute to 5 minutes (maximum 100MB), showcasing team readiness, creativity, preparing for challenges, or anything to show passion to participate. Share the video either on email at (as google drive or We transfer) contact us contact@roboticsolympiads.com mentioning Your Team Name.

Frequently Asked

  • Start and Restarts:

    • The robot will be placed at the starting point with the consent of the referee.
    • Bot may restart the run if the person handling it feels the necessity. A restart can be requested only if the robot doesn’t follow the line, has stopped halfway, or has lost the directions/Black line.
    • At any restart, the robot must be re-positioned back at the start point.
    • It is not allowed to reprogram the robot or to add/remove parts on the robot during the run, but adjusting the sensors is permissible with the consent of the referee.
    • The RACE CLOCK/RUN TIME will reset to zero on every restart. The COMPETITION CLOCK (maximum access time) will keep running during all restarts.
    • Only 3 restarts are allowed for each round. A robot must restart if bot does not start after pressing the Start Button for 30 Second, bot is touched by a human without the consent of the referee, bot moves out of the arena or the referee orders to restart.

    There will be two rounds in Fastest Line Follower gameplay i.e. Elimination round and a Final round

    Elemination Round:

    • Every team will be given 1 minute time to calibrate the bot and maximum 3 minutes for game play. 1 minute of calibration time will not be included in gameplay time.
    • If Bot loses the track, bot operator can touch bot maximum 3 times during the overall gameplay in all trials.
    • Within 3 minutes of gameplay duration, team will get maximum 3 trials. Minimum time will be considered in all 3 trials.
    • Maximum 30 teams would be qualified who reach to finish line in minimum time duration.

    Final Round: 

    • Qualified teams will compete in this round to achieve the minimum runtime. A single run will be conducted for each qualified team. Teams with the minimum runtime will be nominated as the winner of the competition.
    • Team would be given 1 minute for calibration and maximum 5 minutes for gameplay.
    • If Bot loses the track, bot operator can touch bot maximum 3 times during the overall gameplay in all trials.
    • Within 5 minutes of gameplay duration, team will get maximum 3 trials. Minimum time will be considered in all 3 trials.

The Racing track of the Fastest Line Follower challenge has a track of a total length of 180 – 200 ft (approximately) on an arena dimension of 24X24 SqF. The width of the black line will be 25mm. The surface of the track will be white with a black line marked on it. The track may contain crossed, curved, or discontinuous black lines.

The participating bots must be wireless and autonomus. It can be circular / Rectangular in style. Bot must fit inside a box of 20 centimeters length, 20 centimeters wide and 20 centimeters height at any point in time. Maximum weight should not be more than 5Kgs including battery, however, a tolerance of 5% in weight is acceptable.  Participants need to ensure:

  • Batteries must be sealed, immobilized electrolyte type (gel cell, lithium, NiCad, or dry cells).
  • The electric voltage anywhere in the machine should not be more than 16.8V DC at any point in time for each robot.
  • Infrared light-reflecting materials must not be used on the outside. If robots are painted, they must be painted matte. Minor parts that reflect infrared light could be used only if other robots are not affected. Robots must not produce magnetic interference for other robots on the field.
  • If a team claims that their robot is affected by the other team’s robot in any way they must show proof/evidence of the interference. Any interference must be confirmed by a Referee if a claim is placed by the other team.
  • The robot must be autonomous.
  • Robots must be constructed and programmed in a way that their movement is not limited to only one direction and must move in all directions.
  • No wireless communication between bot and operator will be allowed. Bluetooth, RF Module, etc not allowed on bot.
  • Any robotic parts/building material can be used until the robot meets the above specifications and if the design and construction are primarily the original work of the team as ready-made robots are not allowed to compete in the competition.

Venue: Muscat,Oman

Registration Fee :

USD 100 Per Team

Prize Bifurcation : INR USD 500 (1st Prize) | USD 300 (2nd Prize) | USD 250(3rd Prize)

Registration mode: Online.

Accommodation : For inquiries regarding Hospitality Partners you can contact on this Number
(+971-52780945)

For Any Query :
Feel Free To Call : (+971-52780945)
Email : contact@roboticsolympiads.com

DETAILS

Registration Opens: Fri,1st March
Last Date of Registration: Sat, 3 August
Date of Competition:Sat,7th September

ORGANIZER

  • International Robotics Olympiads Foundation
  • +971-52780945
  • contact@roboticsolympiads.com

VENUE

Online and Partner Schools

Scroll to Top